Pyros Platinum
Brush-On Silicone
Platinum-cure Silicone
This new platinum-cure Silicone has the brush-on ease of Latex, but the speed of Silicone! Just mix equal parts of A and B and brush onto your model. Cure it in your oven or kiln at 150 degrees for about ten minutes. Three or four coats gives you a glove-type mold in about an hour! This is excellent for models with deep undercuts.
Now let's talk packaging. You will be mixing up many small batches. We package in a handy flip-top bottle so you can use exactly what you need and no more! No scale required. No odor. No mess. No waste.
This silicone has excellent strength, low shrinkage and a long library life. And it's PEACH! Shore hardness 25 means it's nice and soft.
MM-05-008
4 fl. oz. each, parts A and B
$15.00
MM-05-016
8 fl. oz. each, parts A and B
$24.00
(Notes)
Specifications
| Mix ratio ( A : B ) | 1 : 1 by volume |
| Shore A Hardness | 25 |
| Pot Life | 20 minutes |
| Demold Time | Recoat 1 hour, demold 6 hours; is accelerated by gentle heat |
| Density | .042 lbs/cu in |
| Tear Strength | 100 lbs/linear inch |
| Elongation at break | 675% |