Pyros Pourable
Silicone
Two-Part Silicone
This fast, low-viscosity silicone makes a great block-type mold. Use for open-face or multi-part molds. The low viscosity means that this silicone does not require vacuuming, and will fill the smallest details in your design. Easy 1 to 1 mix by volume means a scale is not necessary. Shore 25A hardness means it is nice and soft. Sets up in about 90 minutes.
MM-06-016
8 fl oz. each, parts A and B
$20.00
MM-06-032
16 fl oz. each, parts A and B
$35.00
Note: The molds in the picture are about 2 inches across and used about 1.3 ounces each
Specifications
| Mix ratio ( A : B ) | 1 : 1, by weight or volume |
| Shore A Hardness | 25 |
| Pot Life | 10 minutes |
| Demold Time | About 1 hour |
| Density | .049 lbs/cu in |
| Tear Strength | 40 lbs/linear inch |
| elongation at break | 250% |